Readme file for RocketRAID 622 Controller BIOS

Copyright (C) HighPoint Technologies, Inc. All rights reserved.
Last updated on Mar 27, 2013.

Please review this file for important information about compatibility issues and
differences in operation that were discovered after our product manuals were
created. In case of conflict among various parts of the documentation set, this
file contains the most current information.

Note: The latest firmware and product documentation will be available for
download at http://www.highpoint-tech.com

This file is divided into the following major sections:

1. Software Version
2. Files Listing
3. Updating BIOS
4. Revision History


1. Software Version
====================
    BIOS version: v1.2


2. Files Listing
=================
    Readme.txt		This file
    load.exe		Flash utility for DOS
    rr622.v12		BIOS image file for RR622
    go.bat		load batch

3. Updating BIOS
====================
    The flash utility (load.exe) is used to update controller BIOS.
	load.exe must run under pure DOS environment. It cannot run in a DOS box
	on Windows system. You should boot from a DOS floppy without any device
	drivers.

    The following command line is used to launch the flash utility:

         go.bat

4. Revision History
====================
   v1.2 3/27/2013
       * Fixup RAID5 booting time too long.

   v1.1 2/1/2012
       * Update autoload for 9120 & 9122.

   v1.1 1/7/2010
       * Support stagged spinup
       * Disable IDE function
       * Reduce real mode to protect mode switch time
       
   v1.0 11/17/2009
       * First release.
