Readme file for RocketRAID 276x Controller BIOS

Copyright (C) HighPoint Technologies, Inc. All rights reserved.
Last updated on Sep 17, 2015.

Please review this file for important information about compatibility issues and
differences in operation that were discovered after our product manuals were
created. In case of conflict among various parts of the documentation set, this
file contains the most current information.

Note: The latest firmware and product documentation will be available for
download at http://www.highpoint-tech.com

This file is divided into the following major sections:

1. Software Version
2. Files Listing
3. Updating BIOS
4. Revision History


1. Software Version
====================
    BIOS version: v1.5


2. Files Listing
=================
    Readme.txt           This file
    load.exe             Flash utility for DOS
    rr2760A.v15          BIOS image file for RR2760 INTA
    go.bat               Update Autoloader and bios script

3. Updating BIOS
====================
    The flash utility (load.exe) is used to update controller BIOS.
	load.exe must run under pure DOS environment. It cannot run in a DOS box
	on Windows system. You should boot from a DOS floppy without any device
	drivers.

    The following command line is used to launch the flash utility:

         load.exe [options] [filename]

    Command line options:

         /A           Update Autoload.

         /Q           Silent mode. The program will not prompt for you to
                      confirm the flashing process.

         /V           Verbose mode. The program will show more detailed
                      information about the flashing process.

         /S <bus>     Only search adapters on specified PCI bus. <bus>
                      specifies the PCI bus number (a value from 0 to 255).

         /D <device>  Only search adapters for specified PCI device number.
                      <device> specifies the PCI device number (a value from
                      0 to 31).

         /C           Configure BIOS parameters before updating.
	


4. Revision History
====================
   v1.5 09/17/2015
       * Fix compatible issue that failed to load BIOS on ASUS Z170 board.
  
   v1.4 01/02/2013
       * increase delay time for SATA disk presence.

   v1.3 10/29/2012
       * Fixed a compatibility issue with some SAS HDDs. 
	   
   v1.2 04/20/2012
       * Support over 2TB HDD.
       * Create Array with "Keep old data" as default.	   
   
   v1.1 09/08/2010
       *Support RR2760A.
       *Fix crash problem when there're more disks to create RAID10/RAID50.
       *Modify RR2760A crash problem when create RAIDs.	
       *Fix cannot boot problem after create RAID in setup.
       *Fix cannot find the first channels problem while cold boot.

   v1.0 04/26/2010
       * First release.
