INCREDIBLE PBX 2022.6 FOR RASPBERRY PI 3, 4, and 400

This release features Asterisk 16 or 18 and includes the very latest 
FreePBX 15 Modules and support for new Incredible SIP Phones.
incrediblepbxfax2022.6.zip installs on RasPi 1GB, 2GB, 4GB, AND 8GB models. 

Previous zip files will not load on current RasPi 4. 

Raspberry Pi Platform (including support for latest RasPi 4B hardware)

1.  Download incrediblepbxfax2022.6.zip
2.  unzip incrediblepbxfax2022.6.zip
3.  Burn .img file to a microSD card
    (Review tutorial for Mac, Linux, Windows: http://nerd.bz/1Qptgb8)
4.  Boot new SDcard image from Raspberry Pi 3 or 4
5.  From display/keyboard/network connected to Raspberry Pi, 
    login as root with password: password (OR USE SSH)
6.  Go through the automatic setup procedure with auto-resize of SD card
    NOTE: Use at least an 16GB card. 32GB/Type 10 card is recommended
7.  After Phase I reboot, use SSH/Putty to login to RasPi,
    login as root with default password: password
8.  When the install completes, set the admin user password for GUI
    access by running /root/admin-pw-change
9.  Set admin Apache password for access to AsteriDex & Reminders
    by running /root/apache-pw-change
10. Also set a very secure root password for SSH access. Run: passwd
11. Then point your browser to the IP address of your server and
    login as admin with the password you set in step #8 above

LATEST TUTORIAL HERE: http://nerdvittles.com/?p=35554

FREE SUPPORT AVAILABLE AT https://voip-info.org/forum/

INSTALLING INCREDIBLE FAX 2022 FOR RASPBIAN

CAUTION: Do NOT use fax installer with incrediblepbxfax2022.6.zip
since it already includes a preconfigured version of Incredible Fax.

When you first access AvantFax with a browser (admin:password), 
you may get a missing page error. Just press the back arrow key
in your browser and the AvantFax main page will appear.

Fax detection also works if you install the Fax Configuration module
in Module Admin and then configure fax detection under Fax tab of 
your Inbound Route with the following settings. Already included
in the Default Inbound Route configuration.

Detect Faxes: YES
Fax Detection Type: SIP
Fax Ring: YES
Fax Detect Time: 4
Fax Destination: Custom Destinations -> Fax (Hylafax)

Send yourself a fax at no cost from https://faxzero.com


MD5 for ZIP: c8cb1129aa966582055b363c96382aaf
MD5 for IMG: c3007514d66389d1c387b646e792f231


FOR WIFI CONNECTIVITY, edit /etc/wpa_supplicant/wpa_supplicant.conf:

1. Insert your WiFi credentials in the following section:

network={
ssid="YourSSID"
psk="YourSSIDpassword"
key_mgmt=WPA-PSK
scan_ssid=1
}

2. Stop and restart the wireless network adapter:

ifdown wlan0
ifup wlan0

3. Change PortKnocker port to wlan0 in /etc/default/knockd

4. Restart PortKnocker: systemctl restart knockd

5. Wait 15 seconds or more. Then decipher your wlan0 network address: ifconfig OR pbxstatus


Incredible PBX and FreePBX code is licensed pursuant to multiple licenses
Incredible PBX is a registered trademark of Ward Mundy & Associates, LLC
Clearly IP is a registered trademark of ClearlyIP.com
Asterisk and Digium are registered trademarks of Sangoma Technologies
FreePBX and Sangoma are registered trademarks of Sangoma Technologies
Copyright © 2007-2022, Sangoma Technologies and Ward Mundy & Associates, LLC