Flashing the TL-WR703N
----------------------

The device can be reflashed using the web interface of the device. 

As shipped from the factory, the web user interface is in Chinese language, but it is fairly easy to find the 
firmware up load page.

VillageTelco SECN firmware for the device is available here:
http://villagetelco.org/download/tmp/firmware/secn/tp-wr703n/unstable/SECN-Factory-Flash/

The original OpenWRT firmware image can be downloaded from here:
http://downloads.openwrt.org/snapshots/trunk/ar71xx/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin

1. Power the device up and connect a PC configured so it can see the device on its default IP address 192.168.1.1 

2. Point your web browser to this address to get the login page. Credentials are 'admin' and 'admin'

3. When you are logged in, select the last item from the menu on the left.

4. Select from the sub-menu items till you find the page for firmware upload. 
   The URL is    http://192.168.1.1/userRpm/SoftwareUpgradeRpm.htm
   It will show a text box to specify the file to be uploaded. 
   Be careful as there is a similar page that is for uploading a saved configuration page.
   See the screen shot image in the drectory where this file is stored.

5. Click on the button to the right of the text box to start the upgrade process.

6. The process takes a few minutes, then the device will restart (blue LED flashes).

7. After the device has restarted (the blue LED stops flashing and is steady on) you should be able to connect
   via web browser and ssh or telnet for the VT-SECN firmware, and telnet for the OpenWrt firmware.
   IP addresses are 192.168.1.20 for VT-SECN firmware, and 192.168.1.1 for original OpenWrt firmware.