# generated by PrusaSlicer 2.5.0+win64 on 2022-11-01 at 17:59:19 UTC
bed_custom_model = 
bed_custom_texture = 
bed_shape = 149.429x13.0734,147.721x26.0472,144.889x38.8229,140.954x51.303,135.946x63.3927,129.904x75,122.873x86.0365,114.907x96.4181,106.066x106.066,96.4181x114.907,86.0365x122.873,75x129.904,63.3927x135.946,51.303x140.954,38.8229x144.889,26.0472x147.721,13.0734x149.429,9.18485e-15x150,-13.0734x149.429,-26.0472x147.721,-38.8229x144.889,-51.303x140.954,-63.3927x135.946,-75x129.904,-86.0365x122.873,-96.4181x114.907,-106.066x106.066,-114.907x96.4181,-122.873x86.0365,-129.904x75,-135.946x63.3927,-140.954x51.303,-144.889x38.8229,-147.721x26.0472,-149.429x13.0734,-150x1.83697e-14,-149.429x-13.0734,-147.721x-26.0472,-144.889x-38.8229,-140.954x-51.303,-135.946x-63.3927,-129.904x-75,-122.873x-86.0365,-114.907x-96.4181,-106.066x-106.066,-96.4181x-114.907,-86.0365x-122.873,-75x-129.904,-63.3927x-135.946,-51.303x-140.954,-38.8229x-144.889,-26.0472x-147.721,-13.0734x-149.429,-2.75546e-14x-150,13.0734x-149.429,26.0472x-147.721,38.8229x-144.889,51.303x-140.954,63.3927x-135.946,75x-129.904,86.0365x-122.873,96.4181x-114.907,106.066x-106.066,114.907x-96.4181,122.873x-86.0365,129.904x-75,135.946x-63.3927,140.954x-51.303,144.889x-38.8229,147.721x-26.0472,149.429x-13.0734,150x-3.67394e-14
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nTIMELAPSE_TAKE_FRAME\nG92 E0\n\n
between_objects_gcode = 
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = "Jessie Premium PLA @V400"
default_print_profile = 0.2mm QUALITY @V400 - Aron
deretract_speed = 0
end_gcode = END_PRINT
extra_loading_move = -2
extruder_colour = ""
extruder_offset = 0x0
gcode_flavor = marlin2
high_current_on_filament_swap = 0
host_type = octoprint
inherits = 
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 8000,5000
machine_max_acceleration_extruding = 8000,1250
machine_max_acceleration_retracting = 8000,1250
machine_max_acceleration_travel = 8000,1250
machine_max_acceleration_x = 8000,1000
machine_max_acceleration_y = 8000,1000
machine_max_acceleration_z = 400,200
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 400,200
machine_max_feedrate_y = 400,200
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 6,10
machine_max_jerk_y = 6,10
machine_max_jerk_z = 0.2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0
max_print_height = 370
min_layer_height = 0.08
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host = 
printer_model = V400
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSUN\nPRINTER_MODEL_V400\n
printer_settings_id = FLSUN V400
printer_technology = FFF
printer_variant = 0.4
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
remaining_times = 1
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 0
retract_length = 0.6
retract_length_toolchange = 10
retract_lift = 0.3
retract_lift_above = 0
retract_lift_below = 369
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = M190 S0 ; Prevents prusaslicer from prepending m190 to the gcode interfering with the macro\nM109 S0 ; Prevents prusaslicer from prepending m109 to the gcode interfering with the macro\nSTART_PRINT BED_TEMP=[first_layer_bed_temperature] EXTRUDER_TEMP=[first_layer_temperature]
template_custom_gcode = 
thumbnails = 32x32,400x300
thumbnails_format = PNG
toolchange_gcode = 
use_firmware_retraction = 1
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0